ELANTAS PDG CONATHANE EN-8 Polyurethane Encapsulant Part B 1 qt Can

Part number: EN-8 PART B QT
ELANTAS PDG CONATHANE EN-8 Polyurethane Encapsulant Part B 1 qt Can
Quantity Price
1 $158.23 158.230000000 USD New Available EN-8 PART B QT
2-6 $146.86 146.860000000 USD New Available EN-8 PART B QT
7+ $135.49 135.490000000 USD New Available EN-8 PART B QT
Stocked Item. Usually Ships in 1-2 Business Days. Non-returnable product. Canceled orders may incur a fee at the supplier’s discretion.
  • A Made in the USA

ELANTAS PDG CONATHANE EN-8 Polyurethane Resin System is a two component, non-MBOCA system that is used for molding and potting electrical assemblies that are exposed to extreme thermal changes. It is typically used for print circuit boards, electrical cables, connectors, strain sensitive devices, and wire wound devices. It offers good dielectric properties, hydrolytic stability, low viscosity, high elongation, and resistance to fungus and thermal shock. Part B, 1 qt Can.

<p>ELANTAS PDG&nbsp;CONATHANE EN-8 Polyurethane Resin System is a two component, non-MBOCA system that is used for molding and potting electrical assemblies that are exposed to extreme thermal changes. It is typically used for print circuit boards, electrical cables, connectors, strain sensitive devices, and wire wound devices. It offers good dielectric properties, hydrolytic stability, low viscosity, high elongation, and resistance to fungus and thermal shock. Part B, 1 qt Can.</p>
Typical Use: Molding and potting compounds for electrical cables, connectors, modules, wire wound devices, strain sensitive devices, as well as 100% solids coatings for printed circuitry that will be exposed to severe environmental extremes.
Brand: CONATHANE
Chemical Composition: Polyurethane
Color: Amber
Components: 2 part
Cure System: Room Temperature/Heat
Cure Time: 5 to 7d @ 25 °C; 4h @ 60 °C; 2h @ 80 °C; 1h @ 100 °C
Dielectric Strength: 785 V/m @ 25 °C
Elongation: >400%
Flash Point: >93 °C
Hardness: 90 A
Mix Ratio: 100:17.5 by weight
Peel Strength: >20 piw
Specific Gravity: Part B: 0.96; Mixed: 1.01 @ 25 °C
Tensile Strength: >2,000 psi
Viscosity: Part B: 1,000 @ 25 °C; Mixed: 5,500 @ 25 °C
Volume Resistivity: >4.3 x 10^15 ohm-cm @ 25 °C
Working Time: 15min

 

This site uses cookies

We use cookies to provide you with the best possible experience. By using this site, you accept our terms of service and use of cookies.