DYMAX Multi-Cure 9-911-Rev-A Wire Tacking Adhesive Clear is a one component, UV light and heat curing, acrylated urethane that is used for tacking repair wires, PCB repairs, and bonding jumper wires on print circuit boards. It offers high strength bonds, high viscosity, and solvent resistance. 170 mL Cartridge.
Typical Use: | Dymax 9-911 Rev. A has excellent adhesion to a wide variety of surfaces. It forms hard, smooth, translucent bonds to a variety of materials. Multi-Cure 9-911 Rev. A can be cured with either UV or visible light or activator. |
Brand: | Multi-Cure |
Chemical Composition: | Acrylated urethane |
Color: | Clear |
Components: | 1 part |
Cure System: | UV |
Cure Time: | Actual cure time typically is 3 to 5 times fixture time. |
Dielectric Strength: | 1,600 V/mil |
Elongation: | 18% @ break |
Flash Point: | >93.3 °C |
Hardness: | 80 D |
Tensile Strength: | 4,000 psi @ break |
Viscosity: | 36,000 |
Volume Resistivity: | 80 x 10^12 ohm-cm |