ELANTAS PDG CONATHANE EN-21 Polyurethane Encapsulant 1 gal Kit

Part number: EN-21 GAL KIT
ELANTAS PDG CONATHANE EN-21 Polyurethane Encapsulant 1 gal Kit
Quantity Price
1 $515.41 515.410000000 USD New Available EN-21 GAL KIT
2 $478.60 478.600000000 USD New Available EN-21 GAL KIT
3+ $448.47 448.470000000 USD New Available EN-21 GAL KIT
In Stock. We are currently experiencing delays from this supplier. Lead times may vary as product becomes available. NON-RETURNABLE.
  • A Made in the USA
  • R CA Prop 65

ELANTAS PDG CONATHANE EN-21 Polyurethane Resin System is a two component, non-MBOCA system that is used for casting, embedding, potting, and encapsulation of electrical assemblies and power devices. It is recommended for potting print circuit boards, voltage regulators, transformers, rectifiers, and inductors. It cures at room temperature and offers good electrical properties, low viscosity, low toxicity, low shrinkage, and low exotherm. It is resistant to moisture and reversion. 1 gal Kit.

<p>ELANTAS PDG&nbsp;CONATHANE EN-21 Polyurethane Resin System is a two component, non-MBOCA system that is used for casting, embedding, potting, and encapsulation of electrical assemblies and power devices. It is recommended for potting print circuit boards, voltage regulators, transformers, rectifiers, and inductors. It cures at room temperature and offers good electrical properties, low viscosity, low toxicity, low shrinkage, and low exotherm. It is resistant to moisture and reversion. 1 gal Kit.</p>
Typical Use: CONATHANE EN-21 is ideal for use in potting transformers, coils, reed and mercury switches, inductors, solid state ignition systems, voltage regulators, ballasts, micro-circuits, rectifiers, and printed circuit assemblies.
Brand: CONATHANE
Color: Amber
Components: 2 part
Cure System: Room Temperature/Heat
Cure Time: 7d @ 25 °C; 4h @ 80 °C
Dielectric Strength: 650 V/m
Elongation: 155%
Hardness: 80 A
Mix Ratio: 100:116 by weight
Specific Gravity: 1.07 @ 25 °C
Tensile Strength: 2,000 psi
Thermal Conductivity: 7.1 x 10^-4
Viscosity: Part A: 6,000; Part B: 800 @ 25 °C
Volume Resistivity: 7.2 x 10^14 ohm-cm @ 25 °C
Working Time: 40min @ 25 °C

 

This site uses cookies

We use cookies to provide you with the best possible experience. By using this site, you accept our terms of service and use of cookies.