Dow SYLGARD™ 160 Silicone Encapsulant Part A Gray 226.7 kg Pail

Part number: 160 SIL ELAST PT A 226.7KG Manufacturer SKU: 2417600
Dow SYLGARD™ 160 Silicone Encapsulant Part A Gray 226.7 kg Pail
Quantity Price
1 $4,915.32 4915.320000000 USD New Available 160 SIL ELAST PT A 226.7KG
2 $4,605.96 4605.960000000 USD New Available 160 SIL ELAST PT A 226.7KG
3+ $4,296.61 4296.610000000 USD New Available 160 SIL ELAST PT A 226.7KG
Usually Ships in 5-6 Business Weeks. NON-RETURNABLE.
  • A Made in the USA

Dow SYLGARD™ 160 Silicone Elastomer is a two component, room temperature or heat curing encapsulant that is used for general potting applications of power supplies. It has good flowability, moderate thermal conductivity, and flame resistance. 1:1 mix ratio. Part A, 226.7 kg Pail.

<p>Dow SYLGARD™ 160 Silicone Elastomer is a two component, room temperature or heat curing encapsulant that is used for general potting applications of power supplies. It has good flowability, moderate thermal conductivity, and flame resistance. 1:1 mix ratio. Part A, 226.7 kg Pail.</p>
Typical Use: General potting applications: power supplies, connectors, sensors, industrial controls, transformers, amplifiers, high voltage resistor packs, relays.
Brand: SYLGARD
Color: Charcoal Gray
Components: 2 part
Cure System: Room Temperature/Heat
Cure Time: 24h @ 25 °C; 4min @ 100 °C
Dielectric Strength: 19 kV/mm
Flash Point: >101.1 °C
Hardness: 56 A
Key Specifications: UL 94 V-0
Mix Ratio: 1:1 by volume; 1:1 by weight
Service Temperature: -45 to 200 °C
Specific Gravity: Part A: 1.61 @ 25 °C; Mixed: 1.57
Thermal Conductivity: 0.62 W/mK
Viscosity: Part A: 8,100; Mixed: 8,775
Volume Resistivity: 5.6 x 10^14 ohm-cm
Working Time: 25min @ room temperature

 

This site uses cookies

We use cookies to provide you with the best possible experience. By using this site, you accept our terms of service and use of cookies.