ELANTAS PDG CONATHANE EN-7 Polyurethane Encapsulant Part B 1 qt Can

Part number: EN-7 PART B QT
ELANTAS PDG CONATHANE EN-7 Polyurethane Encapsulant Part B 1 qt Can
Quantity Price
1 $106.70 106.700000000 USD New Available EN-7 PART B QT
2-10 $97.69 97.690000000 USD New Available EN-7 PART B QT
11+ $88.69 88.690000000 USD New Available EN-7 PART B QT
In Stock. Usually Ships in 1-2 Business Days. NON-RETURNABLE.
  • A Made in the USA

ELANTAS PDG CONATHANE EN-7 Polyurethane Resin System is a two component, non-MBOCA system that is used for molding and potting electrical assemblies that are exposed to extreme thermal changes. It is typically used for print circuit boards, electrical cables, connectors, strain sensitive devices, and wire wound devices. It offers good dielectric properties, hydrolytic stability, low viscosity, high elongation, and resistance to fungus and thermal shock. Part B, 1 qt Can.

Must purchase the EN-4 PART A GAL Polyurethane Encapsulant separately, see below. Mix Ratio by weight is 100/17.5 Part A to Part B.

<p>ELANTAS PDG&nbsp;CONATHANE EN-7 Polyurethane Resin System is a two component, non-MBOCA system that is used for molding and potting electrical assemblies that are exposed to extreme thermal changes. It is typically used for print circuit boards, electrical cables, connectors, strain sensitive devices, and wire wound devices. It offers good dielectric properties, hydrolytic stability, low viscosity, high elongation, and resistance to fungus and thermal shock. Part B, 1 qt Can.</p> <p><span style="color: #ff0000;">Must purchase the EN-4 PART A GAL Polyurethane Encapsulant separately, see below. Mix Ratio by weight is 100/17.5 Part A to Part B.</span></p>
Typical Use: These systems are recommended for use as molding and potting compounds for electrical cables, connectors, modules, wire wound devices, strain sensitive devices, as well as 100% solids coatings for printed circuitry.
Brand: CONATHANE
Color: Amber
Components: 2 part
Cure System: Heat
Dielectric Strength: 785 V/m
Elongation: >400%
Flash Point: >93 °C
Hardness: 90 A
Mix Ratio: 100:17.5 by weight
Specific Gravity: 0.96
Tensile Strength: >2,000 psi
Viscosity: 1,000 @ 25 °C

 

This site uses cookies

We use cookies to provide you with the best possible experience. By using this site, you accept our terms of service and use of cookies.