ResinLab EP691 Epoxy Encapsulant Part A Clear 1 qt Can

Part number: EP691 CLEAR - A QT Manufacturer SKU: EP691 CLEAR A QT
ResinLab EP691 Epoxy Encapsulant Part A Clear 1 qt Can

For current pricing and to place an order please contact your Ellsworth Customer Service Representative.

Call Us

Call Us
Contact customer service at 877-454-9224.

Email Us

Email Us
Email us for product availability.

 

ResinLab EP691 Clear is a two component, room temperature or heat curing, unfilled epoxy encapsulant that is used for medium castings, bonding with most materials, and filling voids. It is electronic grade, semi-rigid, free flowing, and has good air release and wetting properties. It is resistant to bases, acids, water, and most organic solvents. Part A, 1 qt Can.

ResinLab EP691 Clear is a two component, room temperature or heat curing, unfilled epoxy encapsulant that is used for medium castings, bonding with most materials, and filling voids. It is electronic grade, semi-rigid, free flowing, and has good air release and wetting properties. It is resistant to bases, acids, water, and most organic solvents. Part A, 1 qt Can.
Typical Use: Designed for medium sized castings requiring good clarity.
Chemical Composition: Epoxy
Color: Clear
Components: 2 part
Cure System: Room Temperature/Heat
Cure Time: 24h @ room temperature; 1h @ 65 °C; 20min @ 100 °C
Dielectric Strength: 410 V/mil
Elongation: 4% to 9% @ break
Flash Point: 252 °C
Hardness: 80 D
Mix Ratio: 2:12:1 by volume; 100:45 by weight
Service Temperature: -40 to 121 °C
Specific Gravity: Part A: 1.16; Mixed: 1.11
Tensile Strength: 8,500 psi
Thermal Conductivity: 0.14 W/mK
Viscosity: Part A: 16,000; Mixed: 9,000
Volume Resistivity: 8 x 10^14 ohm-cm
Working Time: >2h

 

This site uses cookies

We use cookies to provide you with the best possible experience. By using this site, you accept our terms of service and use of cookies.