Henkel Loctite STYCAST 3050 Epoxy Encapsulant Maroon 1 gal Pail

Part number: 3050 MAROON 12 LB. Manufacturer SKU: 1188155
Henkel Loctite STYCAST 3050 Epoxy Encapsulant Maroon 1 gal Pail

Due to raw material shortages, this product is unavailable to purchase on the web. Please contact your Ellsworth Customer Service Representative to confirm availability and delivery time.

Call Us

Call Us
Contact customer service at 877-454-9224.

Email Us

Email Us
Email us for product availability.

 

Henkel Loctite STYCAST 3050 Maroon, formerly Emerson and Cuming, is a two component, filled, epoxy encapsulant that is used for potting, encapsulating, and reaching tight spaces between components. It offers a very low viscosity, non-abrasive, and machinability. 1 gal Pail.

<p>Henkel Loctite STYCAST 3050 Maroon, formerly Emerson and Cuming, is a two component, filled, epoxy encapsulant that is used for potting, encapsulating, and reaching tight spaces between components. It offers a very low viscosity, non-abrasive, and machinability. 1 gal Pail.</p>
Typical Use: Used for potting and encapsulating applications where physical spacing between elements is very small; such as high density circuit assemblies, coil windings and items of a comparable nature.
Brand: STYCAST
Chemical Composition: Epoxy
Color: Maroon
Components: 2 part
Cure System: Room Temperature/Heat
Cure Time: Catalyst 9: 16 to 24h @ 25 °C; Catalyst 11: 8 to 16h @ 80 °C
Dielectric Strength: Catalyst 9: 15.7 kV/mm; Catalyst 11: 15.7 kV/mm
Flash Point: 82.2 °C
Hardness: Catalyst 9: 88 D; Catalyst 11: 88 D
Mix Ratio: Catalyst 9: 100:12 by volume, 100:7.5 by weight; Catalyst 11: 100:13 by volume, 100:9 by weight
Service Temperature: Catalyst 9: -40 to 130 °C; Catalyst 11: -55 to 155 °C
Specific Gravity: 1.7
Tensile Strength: Catalyst 9: 7,800 psi; Catalyst 11: 5,500 psi
Thermal Conductivity: Catalyst 9: 0.4 W/mK; Catalyst 11: 0.4 W/mK
Viscosity: Catalyst 9: 600; Catalyst 11: 300
Volume Resistivity: Catalyst 9: 5 x 10^15 ohm-cm @ 25 °C; Catalyst 11: 2 x 10^14 ohm-cm @ 25 °C, 3 x 10^11 ohm-cm @ 100 °C
Working Time: Catalyst 9: 45min @ 25 °C; Catalyst 11: >4h @ 25 °C

 

This site uses cookies

We use cookies to provide you with the best possible experience. By using this site, you accept our terms of service and use of cookies.