Print
Email
Part number: 7718-12-250 COLA 10-STICK PACK
Power Adhesives Tecbond 7718 is a low viscosity, polyamide hot melt that is used for knot filling, wood repair, and potting and encapsulation in the electronics industry. It has a tough setting and short open time. Cola, 0.5 in x 12 in Stick.
| Typical Use: | Used for knot filling, wood repair, and potting and encapsulating electronics components. |
| Brand: | Tecbond |
| Chemical Composition: | Synthetic polymer |
| Color: | Cola |
| Components: | 1 part |
| Cure System: | Room Temperature |
| Dielectric Strength: | 30 kV/mm |
| Flash Point: | >200 °C |
| Hot Melt Stick Width: | 1/2 in |
| Hot Melt Type: | Sticks |
| Viscosity: | 1,000 |
| Volume Resistivity: | 1.38 x 10^6 ohm/mm |
