Print
Email
Part number: EP11HTFS GRAY A QT
For current pricing and to place an order please contact your Ellsworth Customer Service Representative.
ResinLab EP11HTFS Gray is a two component, room temperature and heat curing, filled epoxy that is used for bonding plastics and metal. It is semi-rigid, thixotropic, non-sagging, and resistant to cryogenic temperatures, impact, vibration, salt solutions, and water. Part A, 1 qt Can.
| Typical Use: | Ideal for bonding metals and plastics. Non-sag paste for large gap fill or vertical surfaces. |
| Chemical Composition: | Epoxy |
| Color: | Gray |
| Components: | 2 part |
| Cure System: | Room Temperature/Heat |
| Cure Time: | 24 to 72h @ 25 °C; 2h @ 65 °C |
| Dielectric Strength: | 410 V/mil |
| Elongation: | 1% to 2% @ break |
| Flash Point: | >93 °C |
| Hardness: | 85 D |
| Mix Ratio: | 1:1 by volume; 1:1 by weight |
| Service Temperature: | -40 to 150 °C |
| Shear Strength: | 2,300 |
| Specific Gravity: | Part A: 1.26; Mixed: 1.28 |
| Tensile Strength: | 7,000 psi |
| Viscosity: | Part A: 800,000; Mixed: 750,000 |
| Volume Resistivity: | 8 x 10^14 ohm-cm |
| Working Time: | 30 to 40min |
