ResinLab EP11HTFS Epoxy Adhesive Part B Gray 1 qt Can

Part number: EP11HTFS GRAY B QT
ResinLab EP11HTFS Epoxy Adhesive Part B Gray 1 qt Can

For current pricing and to place an order please contact your Ellsworth Customer Service Representative.

 

Call Us

Call Us
Contact Customer Service at 1 (877) 454-9224.

 

ResinLab EP11HTFS Gray is a two component, room temperature and heat curing, filled epoxy that is used for bonding plastics and metal. It is semi-rigid, thixotropic, non-sagging, and resistant to cryogenic temperatures, impact, vibration, salt solutions, and water. Part B, 1 qt Can.

ResinLab EP11HTFS Gray is a two component, room temperature and heat curing, filled epoxy that is used for bonding plastics and metal. It is semi-rigid, thixotropic, non-sagging, and resistant to cryogenic temperatures, impact, vibration, salt solutions, and water. Part B, 1 qt Can.
Typical Use: Ideal for bonding metals and plastics. Non-sag paste for large gap fill or vertical surfaces.
Chemical Composition: Epoxy
Color: Gray
Components: 2 part
Cure System: Room Temperature/Heat
Cure Time: 24 to 72h @ 25 °C; 2h @ 65 °C
Dielectric Strength: 410 V/mil
Elongation: 1% to 2% @ break
Flash Point: >100 °C
Hardness: 85 D
Mix Ratio: 1:1 by volume; 1:1 by weight
Service Temperature: -40 to 150 °C
Shear Strength: 2,300
Specific Gravity: Part B: 1.29; Mixed: 1.28
Tensile Strength: 7,000 psi
Viscosity: Part B: 700,000; Mixed: 750,000
Volume Resistivity: 8 x 10^14 ohm-cm
Working Time: 30 to 40min

 

This site uses cookies

We use cookies to provide you with the best possible experience. By using this site, you accept our terms of service and use of cookies.