Print
Email
Part number: EP11HT GRAY 50ML
| Quantity | Price |
|---|---|
| 1-7 | $25.27 |
| 8-44 | $22.24 |
| 45+ | $19.46 |
Stocked Item. Usually Ships in 1-2 Business Days.
ResinLab EP11HT Gray is a two component, room temperature and heat curing, filled epoxy that is used for bonding plastics and metal. It is semi-rigid, thixotropic, non-sagging, and resistant to cryogenic temperatures, impact, vibration, salt solutions, and water.. 50 mL Cartridge.
| Typical Use: | Ideal for bonding metals and plastics. Non-sag paste for large gap fill or vertical surfaces. |
| Chemical Composition: | Epoxy |
| Color: | Gray |
| Components: | 2 part |
| Cure System: | Room Temperature/Heat |
| Cure Time: | 24 to 48h @ room temperature; 2h @ 65 °C; 20min @ 100 °C |
| Dielectric Strength: | 410 V/mil |
| Elongation: | 2.8% |
| Flash Point: | Part A: >93 °C; Part B: >118 °C |
| Hardness: | 80 D |
| Mix Ratio: | 1:1 by volume; 1:1 by weight |
| Service Temperature: | -40 to 150 °C |
| Shear Strength: | 2,300 |
| Specific Gravity: | Part A: 1.26; Part B: 1.25; Mixed: 1.25 |
| Tensile Strength: | 5,500 psi |
| Thermal Conductivity: | 0.27 W/mK |
| Viscosity: | Part A: 329,000; Part B: 235,000; Mixed: 300,000 (estimate) |
| Volume Resistivity: | 6.18 x 10^15 ohm-cm @ 20 °C |
-
$181.94Display Quantity PricingPart #: EA50P -
$30.61Display Quantity PricingPart #: EA51-1 TO 1 / 2 TO 1 -
$65.00 ($1.30 each)Sold as a pack (50/pk).Display Quantity PricingPart #: EAMAQ05-24LS -
$327.39Display Quantity PricingPart #: EDS408M -
CALL FOR QUOTE
(877) 454-9224Part #: LC120FR -
$80.00 ($1.60 each)Sold as a pack (50/pk).Display Quantity PricingPart #: EAMAH06-21S -
$65.03Display Quantity PricingPart #: EP1026HP 50ML -
$26.82Display Quantity PricingPart #: EP1290 GRAY 50ML -
$39.30Display Quantity PricingPart #: EP750 CLEAR 50ML -
$607.70 ($60.77 each)Sold as a pack (10/pk).Display Quantity PricingPart #: EP1026T3 50ML