ELANTAS PDG CONATHANE EN-1556 Polyurethane Encapsulant Black 300/100 mL Ratio Pak

Part number: PFEN1556300
ELANTAS PDG CONATHANE EN-1556 Polyurethane Encapsulant Black 300/100 mL Ratio Pak

For current pricing and to place an order please contact your Ellsworth Customer Service Representative.

 

Call Us

Call Us
Contact Customer Service at 1 (877) 454-9224.

 

ELANTAS PDG CONATHANE EN-1556 Polyurethane Resin System Black is a two component, polyether based system that is used for casting, molding, potting, and encapsulating electrical assemblies such as connectors, print circuit boards, cables, pumps, and conveyors. It cures at room to elevated temperatures, contains no MBOCA, and is resistant to water, gasoline, oils, abrasion, and corrosion. 300/100 mL Ratio Pak.

<p>ELANTAS PDG&nbsp;CONATHANE EN-1556 Polyurethane Resin System Black is a two component, polyether based system that is used for casting, molding, potting, and encapsulating electrical assemblies such as connectors, print circuit boards, cables, pumps, and conveyors. It cures at room to elevated temperatures, contains no MBOCA, and is resistant to water, gasoline, oils, abrasion, and corrosion. 300/100 mL Ratio Pak.</p>
Typical Use: Primarily intended for use as a molding, encapsulating, and potting compound for harness breakouts, watertight electrical connectors, cables, cable end seals, printed circuitry, and other electrical components.
Brand: CONATHANE
Chemical Composition: Polyether
Color: Black
Components: 2 part
Cure System: Room Temperature/Heat
Cure Time: 10 to 14d @ 25 °C; 16h @ 82.2 °C; 8 to 10h @ 100 °C
Dielectric Strength: 350 V/m
Elongation: 350%
Flash Point: Part A: >93 °C; Part B: >100 °C
Hardness: 80 A
Key Specifications: MIL-M-24041-C
Mix Ratio: 3:1 by volume; 100:33 by weight
Specific Gravity: Mixed: 1.05
Tensile Strength: 5,000 psi
Viscosity: Mixed: 10,400
Volume Resistivity: 2.4 x 10^12 ohm-cm @ 25 °C; 9.6 x 10^10 ohm-cm @ 121.1 °C

 

This site uses cookies

We use cookies to provide you with the best possible experience. By using this site, you accept our terms of service and use of cookies.