ELANTAS PDG CONATHANE EN-14 Polyurethane Encapsulant Black 5 gal Kit

Part number: EN-14 BLACK 5-GAL KIT
ELANTAS PDG CONATHANE EN-14 Polyurethane Encapsulant Black 5 gal Kit

For current pricing and to place an order please contact your Ellsworth Customer Service Representative.

 

Call Us

Call Us
Contact Customer Service at 1 (877) 454-9224.

 

ELANTAS PDG CONATHANE EN-14 Polyurethane Elastomer System Black is a two component, unfilled polyurethane that is used for encapsulation and potting of electrical and heat sensitive assemblies. It offers flexibility, low viscosity, fast curing, fast gelling, and resistance to water and thermal shock. It can be applied by spraying, brushing or casting methods. 5 gal Kit.

<p>ELANTAS PDG CONATHANE EN-14 Polyurethane Elastomer System Black is a two component, unfilled polyurethane that is used for encapsulation and potting of electrical and heat sensitive assemblies. It offers flexibility, low viscosity, fast curing, fast gelling, and resistance to water and thermal shock. It can be applied by spraying, brushing or casting methods. 5 gal Kit.</p>
Typical Use: CONATHANE EN-14 is particularly recommended for potting and encapsulating strain and heat sensitive devices in modules, connectors, and units required to operate in the temperature range of -65 to 130 °C.
Brand: CONATHANE
Color: Black
Components: 2 part
Cure System: Room Temperature/Heat
Cure Time: 3 to 4d @ 25 °C; 3h @ 60 °C
Dielectric Strength: >500 V/mil
Elongation: 110%
Hardness: 65 A
Mix Ratio: 1:1 by volume; 100:90 by weight
Specific Gravity: 1.04 @ 25 °C
Tensile Strength: 700 psi
Viscosity: Mixed: 1,200
Volume Resistivity: 3 x 10^13 ohm-cm @ 25 °C
Working Time: 15min

 

This site uses cookies

We use cookies to provide you with the best possible experience. By using this site, you accept our terms of service and use of cookies.