Print
Email
Part number: 10610
ITW Performance Polymers Devcon Aluminum Putty F 10610 is an epoxy that is used for patching machinery, aluminum castings, and concrete. It can be drilled, tapped, and machined using metalwork tools. 1 lb Kit.
| Typical Use: | Patch aluminum castings; make jigs, dies, and holding fixtures. |
| Chemical Composition: | Epoxy |
| Color: | Aluminum |
| Components: | 2 part |
| Cure Time: | 16h, 2.5h @ room temperature and 4h @ 93.3 °C |
| Dielectric Strength: | 100 V/mil |
| Flash Point: | Resin: >204.4 °C; Hardener: >93.3 °C |
| Hardness: | 85 D |
| Key Specifications: | DOD-C-24176B Type II If you require manufacturer certification to a certain spec, please request a quote as additional fees may apply. Ellsworth Adhesives is an ISO-9001 registered and AS9120 compliant distributor. |
| Mix Ratio: | 4:1 by volume; 9:1 by weight |
| Shear Strength: | 2,600 |
| Specific Gravity: | Mixed: 1.58 |
| Thermal Conductivity: | 1.73 x 10^-3 |
| Viscosity: | Mixed: Putty |
| Working Time: | 60min @ 23.8 °C |
-
$551.74Display Quantity PricingPart #: 14630 -
$1,767.48 ($147.29 each)Sold as a pack (12/pk).Display Quantity PricingPart #: 14415
