Dow SYLGARD™ 160 Silicone Encapsulant Part B Off-White 5.4 kg Pail

Part number: PF160BGL
Dow SYLGARD™ 160 Silicone Encapsulant Part B Off-White 5.4 kg Pail

For current pricing and to place an order please contact your Ellsworth Customer Service Representative.

Call Us

Call Us
Contact customer service at 877-454-9224.

Email Us

Email Us
Email us for product availability.

 

Dow SYLGARD™ 160 Silicone Elastomer is a two component, room temperature or heat curing encapsulant that is used for general potting applications of power supplies. It has good flowability, moderate thermal conductivity, and flame resistance. 1:1 mix ratio. Part B, 5.4 kg Pail.


This is a Dow product repackaged by KitPackers, an authorized repackager of Dow.

<p>Dow SYLGARD&trade; 160 Silicone Elastomer is a two component, room temperature or heat curing encapsulant that is used for general potting applications of power supplies. It has good flowability, moderate thermal conductivity, and flame resistance. 1:1 mix ratio. Part B, 5.4 kg Pail.</p> <p><br />This is a Dow product repackaged by KitPackers, an authorized repackager of Dow.</p>
Typical Use: General potting applications: power supplies, connectors, sensors, industrial controls, transformers, amplifiers, high voltage resistor packs, relays.
Brand: SYLGARD
Color: Off-White
Components: 2 part
Cure System: Room Temperature/Heat
Cure Time: 24h @ 25 °C; 4min @ 100 °C
Dielectric Strength: 19 kV/mm
Flash Point: >101.1 °C
Hardness: 56 A
Key Specifications: UL 94 V-0
Mix Ratio: 1:1 by volume; 1:1 by weight
Service Temperature: -45 to 200 °C
Specific Gravity: Part B: 1.61 @ 25 °C; Mixed: 1.57
Thermal Conductivity: 0.62 W/mK
Viscosity: Part B: 3,950; Mixed:8,775
Volume Resistivity: 5.6 x 10^14 ohm-cm
Working Time: 25min @ room temperature

 

This site uses cookies

We use cookies to provide you with the best possible experience. By using this site, you accept our terms of service and use of cookies.