Print
Email
Part number: PF160200
| Quantity | Price |
|---|---|
| 1 | $183.31 |
| 2-7 | $141.15 |
| 8+ | $131.07 |
Stocked Item. We are currently experiencing delays from this supplier. Lead times may vary as product becomes available. Non-returnable product. Canceled orders may incur a fee at the supplier’s discretion.
Dow SYLGARD™ 160 Silicone Elastomer is a two component, room temperature or heat curing encapsulant that is used for general potting applications of power supplies. It has good flowability, moderate thermal conductivity, and flame resistance. 1:1 mix ratio. 200 mL Cartridge.
This is a Dow product repackaged by KitPackers, an authorized repackager of Dow.
Please note mixer will not be shipped with this product. Review related products below and purchase separately
| Typical Use: | General potting applications: power supplies, connectors, sensors, industrial controls, transformers, amplifiers, high voltage resistor packs, relays. |
| Brand: | SYLGARD |
| Color: | Gray |
| Components: | 2 part |
| Cure System: | Room Temperature/Heat |
| Cure Time: | 24h @ 25 °C; 4min @ 100 °C |
| Dielectric Strength: | 19 kV/mm |
| Flash Point: | >101.1 °C |
| Hardness: | 56 A |
| Key Specifications: | UL 94 V-0 |
| Mix Ratio: | 1:1 |
| Service Temperature: | -45 to 200 °C |
| Specific Gravity: | 1.57 |
| Thermal Conductivity: | 0.62 W/mK |
| Viscosity: | 8,775 |
| Volume Resistivity: | 5.6 x 10^14 ohm-cm |
| Working Time: | 25min @ room temperature |
-
$116.00 ($2.32 each)Sold as a pack (50/pk).Display Quantity PricingPart #: EAMCH06-24S