ResinLab EP1195 Epoxy Encapsulant Black 50 mL Cartridge

Part number: EP1195 BLACK 50ML
ResinLab EP1195 Epoxy Encapsulant Black 50 mL Cartridge

For current pricing and to place an order please contact your Ellsworth Customer Service Representative.

 

Call Us

Call Us
Contact Customer Service at 1 (877) 454-9224.

 

Send an Email

Send an Email
We will respond within 1 business day.

ResinLab EP1195 Black is a two component, room and elevated temperature curing, flame resistant, epoxy casting system that is fast gelling, low viscosity, and resistant to salt solutions, water, most organic and inorganic solvents. 50 mL Cartridge.

ResinLab EP1195 Black is a two component, room and elevated temperature curing, flame resistant, epoxy casting system that is fast gelling, low viscosity, and resistant to salt solutions, water, most organic and inorganic solvents. 50 mL Cartridge.
Typical Use: For use in either MMD equipment or side by side dual cartridge for easy dispensing.
Chemical Composition: Epoxy
Color: Black
Components: 2 part
Cure System: Room Temperature/Heat
Cure Time: 24h @ 25 °C; 1h @ 65 °C
Dielectric Strength: 440 V/mil
Elongation: 1.2%
Flash Point: >93 °C
Hardness: 85 D
Mix Ratio: 2:1 by volume; 2.8:1 by weight
Service Temperature: -40 to 150 °C
Shear Strength: 3,000
Specific Gravity: Part A: 1.37; Part B: 0.97; Mixed: 1.24
Tensile Strength: 5,400 psi
Thermal Conductivity: 0.30 W/mK
Viscosity: Part A: 5,000; Part B: 1,400; Mixed: 2,800
Volume Resistivity: 6.5 x 10^15 ohm-cm
Working Time: 10min

 

This site uses cookies

We use cookies to provide you with the best possible experience. By using this site, you accept our terms of service and use of cookies.