ELANTAS PDG CONATHANE EN-1556 Polyurethane Encapsulant Part A 5 gal Can

Part number: EN-1556 PART A 5-GAL Manufacturer SKU: 125000
ELANTAS PDG CONATHANE EN-1556 Polyurethane Encapsulant Part A 5 gal Can
Quantity Price
1 $2,076.43 2076.430000000 USD New Limited Availability EN-1556 PART A 5-GAL
2 $1,901.15 1901.150000000 USD New Limited Availability EN-1556 PART A 5-GAL
3+ $1,725.86 1725.860000000 USD New Limited Availability EN-1556 PART A 5-GAL
Usually Ships in 3-4 Business Weeks. Non-returnable product. Canceled orders may incur a fee at the supplier’s discretion.
  • A Made in the USA

ELANTAS PDG CONATHANE EN-1556 Polyurethane Encapsulant is a two-component polyether-based system used as an encapsulating, molding, and potting compound. It is recommended for harness breakouts, watertight electrical connectors, cables, and cable end seals. It also offers thermal shock resistance and excellent hydrolytic stability. Part A, 5 gal Can.

<p><span>ELANTAS PDG CONATHANE EN-1556 Polyurethane Encapsulant is a two-component polyether-based system used as an encapsulating, molding, and potting compound. It is recommended for harness breakouts, watertight electrical connectors, cables, and cable end seals. It also offers thermal shock resistance and excellent hydrolytic stability. Part A, 5 gal Can.</span></p>
Typical Use: Used as an encapsulating, molding, and potting compound.
Brand: CONATHANE
Color: Amber
Components: 2 part
Cure System: Room Temperature/Heat
Cure Time: 14d @ 25 °C; 16h @ 82 °C; 8 to 10h @ 100 °C
Dielectric Strength: 350 V/mil
Elongation: 400%
Flash Point: >94 °C
Hardness: 74 to 80 A
Mix Ratio: 100:33 by volume; 100:33 by weight
Specific Gravity: 1.05
Tensile Strength: 1,400 to 5,000 psi
Viscosity: Part A: 18,000; Mixed: 10,040
Volume Resistivity: 2.4 x 10^12 to 9.6 x 10^10 ohm-cm

 

This site uses cookies

We use cookies to provide you with the best possible experience. By using this site, you accept our terms of service and use of cookies.