Dymax Multi-Cure 9-911-REV-B Wire Tacking Adhesives is a one component, UV light and heat curing, acrylated urethane that is used for tacking repair wires, PCB repairs, and bonding jumper wires on print circuit boards. It offers high strength bonds, high viscosity, and solvent resistance. 30 mL MR Syringe.
Typical Use: | Used for wire tacking, bonding jumper wires, and PCB repair. |
Brand: | Multi-Cure |
Chemical Composition: | Acrylated urethane |
Color: | Light Yellow |
Components: | 1 part |
Cure System: | UV |
Cure Time: | Actual cure time typically is 3 to 5 times fixture time. |
Dielectric Strength: | 1,600 V/mil |
Elongation: | 30% @ break |
Flash Point: | 101 °C |
Hardness: | 80 D |
Service Temperature: | -50 to 150 °C |
Tensile Strength: | 3,500 psi @ break |
Viscosity: | 25,000 |
Volume Resistivity: | 80 x 10^12 ohm-cm |