Print
Email
Part number: EP1056LC BLACK 50ML
ResinLab EP1056LC Black is a two component, room temperature and heat curing, urethane epoxy adhesive that is used for bonding hard to bond substrates and metal. It is thixotropic, non-sagging, and has excellent gap filling abilities. It is resistant to most organic solvents and water. 50 mL Cartridge.
| Typical Use: | Designed to give good adhesion to metals and hard to bond surfaces such as PVC. |
| Chemical Composition: | Epoxy/urethane |
| Color: | Black |
| Components: | 2 part |
| Cure System: | Room Temperature/Heat |
| Cure Time: | 24 to 72h @ 25 °C; 2h @ 65 °C |
| Dielectric Strength: | 410 V/mil |
| Elongation: | 2% to 3% @ break |
| Flash Point: | Part A: >249 °C; Part B: >100 °C |
| Hardness: | 80 D |
| Mix Ratio: | 2:1 by volume; 245:100 by weight |
| Service Temperature: | -40 to 150 °C |
| Specific Gravity: | Mixed: 1.1 |
| Tensile Strength: | 5,000 psi |
| Thermal Conductivity: | 0.16 W/mK |
| Viscosity: | Mixed: 165,000 |
| Volume Resistivity: | 8 x 10^14 ohm-cm |
| Working Time: | 30min |
-
$310.00Display Quantity PricingPart #: EAD50PK-MR -
$71.50 ($1.43 each)Sold as a pack (50/pk).Display Quantity PricingPart #: EAMAQ05-24LS -
$30.00Display Quantity PricingPart #: EAD50MS-11/21 -
$85.50 ($1.71 each)Sold as a pack (50/pk).Display Quantity PricingPart #: EAMAH06-21S