Print
Email
Part number: EP1306 50ML
| Quantity | Price |
|---|---|
| 1-3 | $61.41 |
| 4-19 | $51.26 |
| 20+ | $43.91 |
Stocked Item. We are currently experiencing delays from this supplier. Lead times may vary as product becomes available. Non-returnable product. Canceled orders may incur a fee at the supplier’s discretion.
ResinLab EP1306 Gray is a two component, room temperature and heat curing, acrylic/epoxy hybrid adhesive that has good adhesion and wetting to most surfaces. It is resistant to acids, bases, water and most organic solvents. 50 mL Cartridge.
| Typical Use: | Designed for use in side-by-side dispensing cartridges or meter/mix and dispense equipment. |
| Chemical Composition: | Acrylic Epoxy |
| Color: | Gray |
| Components: | 2 part |
| Cure System: | Room Temperature/Heat |
| Cure Time: | 16 to 24h @ 25 °C; 1h @ 60 °C; 10min @ 100 °C |
| Dielectric Strength: | 110 V/mil |
| Elongation: | 0% to 1% @ break |
| Flash Point: | Part A: >249 °C; Part B: >121 °C |
| Hardness: | 80 D |
| Mix Ratio: | 2:1 by volume; 2.07:1 by weight |
| Service Temperature: | -40 to 150 °C |
| Shear Strength: | 3,300 |
| Specific Gravity: | Mixed: 1.59 |
| Tensile Strength: | 4,500 psi |
| Thermal Conductivity: | 0.9 W/mK |
| Viscosity: | Mixed: 202,000 |
| Volume Resistivity: | 1.1 x 10^16 ohm-cm |
-
$327.39Display Quantity PricingPart #: EDS408M -
$65.00 ($1.30 each)Sold as a pack (50/pk).Display Quantity PricingPart #: EAMAQ05-24LS -
$30.61Display Quantity PricingPart #: EA51-1 TO 1 / 2 TO 1