Dow Corning Sylgard 160 Silicone Encapsulant Part A Gray 5.4 kg Pail

Part number: 160 SIL ELAST PT A 5.4KG Manufacturer SKU: 3088111
Dow Corning Sylgard 160 Silicone Encapsulant Part A Gray 5.4 kg Pail
Quantity Price
1 $171.08 171.080000000 USD New Available 160 SIL ELAST PT A 5.4KG
2-8 $143.57 143.570000000 USD New Available 160 SIL ELAST PT A 5.4KG
9+ $112.62 112.620000000 USD New Available 160 SIL ELAST PT A 5.4KG
In Stock. Usually Ships in 1-2 Business Days.

Dow Corning Sylgard 160 Silicone Elastomer is a two component, room temperature or heat curing encapsulant that is used for general potting applications of power supplies. It has good flowability, moderate thermal conductivity, and flame resistance. 1:1 mix ratio. Part A, 5.4 kg Pail.

Dow Corning Sylgard 160 Silicone Elastomer is a two component, room temperature or heat curing encapsulant that is used for general potting applications of power supplies. It has good flowability, moderate thermal conductivity, and flame resistance. 1:1 mix ratio. Part A, 5.4 kg Pail.
Typical Use: General potting applications: power supplies, connectors, sensors, industrial controls, transformers, amplifiers, high voltage resistor packs, relays.
Brand: Sylgard
Color: Charcoal Gray
Components: 2 part
Cure System: Room Temperature/Heat
Cure Time: 24h @ 25 °C; 4min @ 100 °C
Dielectric Strength: 19 kV/mm
Flash Point: >101.1 °C
Hardness: 56 A
Key Specifications: UL 94 V-0
Mix Ratio: 1:1 by volume; 1:1 by weight
Service Temperature: -45 to 200 °C
Specific Gravity: Part A: 1.61 @ 25 °C; Mixed: 1.57
Thermal Conductivity: 0.62 W/mK
Viscosity: Part A: 8,100; Mixed: 8,775
Volume Resistivity: 5.6 x 10^14 ohm-cm
Working Time: 25min @ room temperature