Product Details

Resinlab_2(3)
Product Name:
Resinlab EP1330 Epoxy Adhesive Black 0.1 gal Cartridge
Part#:
EP1330 1/10 GL
Description:

Sold as a pack (24/pk). Resinlab EP1330 is a one part heat cure epoxy polymer system. It can also be used as a small mass potting or staking compound, or a dam adhesive in a "dam and fill" application, or general polymer system where the application requires high thermal conductivity, low shrinkage, and low CTE. 0.1 gal Cartridge.

See related items below.

Pricing
Status Message: For pricing please contact your Ellsworth Customer Service Representative at 877-454-9224.

Product Information
Typical Use: Excellent adhesion to a wide variety of plastics, metals and circuit board materials.

Color/Appearance: Black
Product Name: Resinlab EP1330 Epoxy Adhesive Black 0.1 gal Cartridge
1 part or 2: 1 part
Base Chemistry: Epoxy polymer
Cure Time: 5 to 10min @ 150 °C
Dielectric Strength: 440 V/mil
Durometer/Hardness: 90 D
Elongation: <1% @ break
Flash Point: >93 °C
Service Temperature: -40 to 150 °C
Specific Gravity: 1.91
Tensile Strength: 7,000 psi
Thermal Conductivity: 1.07 W/mK
Viscosity Cp: 500,000
Volume Resistance: 8 x 10^14 ohm-cm

Related Products

Resinlab EP1330 is a one part heat cure epoxy polymer system. It can also be used as a small mass potting or staking compound, or a dam adhesive in
Glue Doc NA

SMTA Member

ISA Member