Dow Corning 732 Silicone Sealants
Eccobond
Stycast
Eccocoat
Thermogrip
Sylgard
MolyKote
Scotch Weld
Scotch Grip
Silastic
Elastoplastic
Loctite Black Max
Super Bonder
Loctite Prism
TAK PAK
LocQuic
Jet Melt
Polyguns
Multicore
Cynergy
Sikaflex
Dow Corning 3145
Dow Corning 3140
Statomix
plastic welder
5 minute epoxy
Epoxi-Patch
Electrically Conductive
Aerospace
Aerospace Grease
Aerospace Spec Chemical
Aerospace Sealants
Two_Part_Applicators
Dot Shot Pro
Plastic Bottles and Caps for Manual Dispensing
UV Curing Products
Marine Repair Kit
RTV
Silicone Encapsulants and Potting Materials
Urethane Encapsulants and Potting Materials
Shop Family Brands
Epoxy Encapsulants and Potting Materials
Rite-Lok primer, activator, debonder cyanoacrylate products
Low VOC, Environmentally-Friendly Adhesive and Sealant Solutions
Adhesive Starter Kits
Conformal Coating - Dymax - Application Examples
Cyanoacrylates
Medical Device Adhesives - cyanoacrylate, UV curing, plastic bonding, biocompatiblity - Permabond
Medical Device Adhesive - epoxy, cyanoacrylate, UV cure - Loctite
Hot Melt Adhesive Products
Dow Corning 723
3M Super 77 Multipurpose Adhesive Spray
Loctite 242 Thixotropic Anaerobic Threadlocking Adhesive
HumiSeal 1B31 Single Component Acrylic
Medical Device Adhesives - Anaerobic, Cyanoacrylate, Epoxy, UV Cure, Dispensing Equipment
Dow Corning LED Products - Optical Encapsulants, Thermally Conductive, Conformal, Assembly, Protecti
Henkel Electronic Solutions
Dow Corning Conformal Coatings
Dymax Conformal Coatings
Pressure Sensitive Adhesive
3M POWER Line Adhesives and Sealants
3M Series 20 Aerosol Adhesive
Dow Corning SE 9187 L Conformal Coating
Dow Corning 111 Silicone Compound
Dow Corning 1-2577 Conformal Coating
Dow Corning 7091 RTV Adhesive
Dow Corning OE-6002 Optical Encapsulant
Dow Corning Q3-3636
Dow Corning 3-8186
Dow Corning 3-1900 Series Conformal Coatings
Loctite 242 Thixotropic Anaerobic Threadlocking Adhesive

Loctite 242 Threadlocker - Medium Strength - Removable strength, general purpose threadlocking adhesive is well suited for fasteners between 1/4" to 3/4" diameter (6mm to 20mm). Applied to threaded components before assembly, Loctite 242 Threadlocker has controlled lubricity for accurate clamp loads. Parts can be separated using hand tools. Approved for use in and around food processing areas.

 
Part # Sub Category Name Description
LOCTITE 242 Threadlocker Medium Strength 0.5 ml 24205 Anaerobic

LOCTITE 242 Threadlocker Medium Strength
0.5 ml

LOCTITE 242 is a single component anaerobic threadlocking material; it is thixotropic, has medium strength and cures when confined in the absence of air between close fitting metal surfaces; it has a secondary activator cure that may effect bond performance. 0.5 ml capsule.

Minimum purchase of one pack of 100 capsules required.

LOCTITE 242 Threadlocker Medium Strength 10 ml 24221 Anaerobic

LOCTITE 242 Threadlocker Medium Strength
10 ml

LOCTITE 242 is a single component anaerobic threadlocking material; it is thixotropic, has medium strength and cures when confined in the absence of air between close fitting metal surfaces; it has a secondary activator cure that may effect bond performance. 10 ml bottle.

This product complies to MIL-S-46163A. If you require manufacturer certification, please
request a quote. Ellsworth Adhesives is an ISO-9001:2008 registered and AS9120 compliant distributor.

LOCTITE 242 Threadlocker Medium Strength 50 ml 24231 Anaerobic

LOCTITE 242 Threadlocker Medium Strength
50 ml

LOCTITE 242 is a single component anaerobic threadlocking material; it is thixotropic, has medium strength and cures when confined in the absence of air between close fitting metal surfaces; it has a secondary activator cure that may effect bond performance. 50 ml bottle.

This product complies to MIL-S-46163A. If you require manufacturer certification, please
request a quote. Ellsworth Adhesives is an ISO-9001:2008 registered and AS9120 compliant distributor.

LOCTITE 242 Threadlocker Medium Strength 1 Lt 24243 Anaerobic

LOCTITE 242 Threadlocker Medium Strength
1 Lt

LOCTITE 242 is a single component anaerobic threadlocking material; it is thixotropic, has medium strength and cures when confined in the absence of air between close fitting metal surfaces; it has a secondary activator cure that may effect bond performance. 1 Liter bottle.