Product Details

184 SIL ELAST 250ML KIT_Web
Product Name:
Dow Corning Sylgard 184 Silicone Encapsulant 250 mL Kit Clear
Part#:
184 SIL ELAST 250ML KIT
Description:

Dow Corning Sylgard 184 Silicone Elastomer is a two-part; 10:1 mix; minimal shrinkage; no exotherm during cure; no solvents or cure byproducts; deep section cure; repairable; good dielectric properties; flexible elastomer. 250 mL Kit.

See related items below.

Pricing
Status Message: This item has been discontinued. Please see recommended replacement below.

Product Information
Typical Use: General potting applications: power supplies, connectors, sensors, industrial controls, transformers, amplifiers, high voltage resistor packs, relays; adhesive/encapsulant for solar cells; adhesive handling beam lead integrated circuits during processing.

Key Specifications: MIL-I-81550C, UL 94 V-0 If you require manufacturer certification to a certain spec, please request a quote as additional fees may apply. Ellsworth Adhesives is an ISO-9001 registered and AS9120 compliant distributor.
Color/Appearance: Clear
Product Name: Dow Corning Sylgard 184 Silicone Encapsulant 250 mL Kit Clear
1 part or 2: 2 part
Base Chemistry: Silicone
Cure Time: 45min @ 100 °C
Dielectric Strength: 350 V/mil
Durometer/Hardness: 48 A
Flash Point: 101 °C
Mix Ratio: 10:1
Service Temperature: -45 to 200 °C
Specific Gravity: 1.03
Thermal Conductivity: 0.16 W/mK
Viscosity Cp: 4,575
Volume Resistance: 2.9 x 10^14 ohm-cm
Work Life/Pot Life: >2h @ room temperature

Related Products

Dow Corning Sylgard 184 Silicone Elastomer is a two-part, 10:1 mix ratio, minimal shrinkage, clear encapsulant with excellent flame resistance. Dow

SMTA Member

ISA Member